Powder Feeder Weighing Robot
The weighing and mixing of ore and sintering powders for sample analysis in
the mining industry is a laborious and time consuming activity. Labman specialises in the automation of feeding and weighing applications. The system shown here is the Labman 1200, gantry-type Cartesian co-ordinate robot. The system design has a robust cabinet with fume/air extraction built in and interlocked doors for containment to minimise hazards. It is designed to feed ore and sintering powders to fine tolerances typically +/- 2mg with a sample cycle time of around 2 minutes. Even lower tolerances +/- 0.2mg are possible should it be required. The sintering powder is auger and vibro-fed from a hopper and the sample ore vibrated and poured from individual sample containers. New sample vials can be fed into the workspace from underneath for continuous 24 hour operation.
Related Systems
Powder Feeding Systems
Bespoke Powder Feeding
Mining Applications & Systems
Forced Degradation Robot
Fill, Weigh, Label & Cap System
Karl Fischer Analysis
Cryogenic Plant Sample Grinder System
Powder Feeder Weighing Robot
Weighing Systems
Weighing Systems
AutoForce / Load Tester
Automated Vial Weighing System
Forced Degradation Robot
Fill, Weigh, Label & Cap System
Automated Labelling and Weighing
Metered Dose Inhaler (MDI) Shot Weighers
MDI Canister Pressure Tester
Powder Feeder Weighing Robot
Bespoke Vial Weighing Systems
Autovial Compound Weighing
Micronic, Matrix and Abgene tube tare weighers
Vitens Automated Water Laboratory